Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
ASN QoS Descriptor Configuration Mode Commands
▀ schedule-type
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
Configures the data delivery service type to Real-Time Variable Rate (RT-VR) service for specific ASN GW
service.
service.
Configures the data delivery service type to Unsolicited Grant Service (UGS) for specific ASN GW service.
Specifies the maximum interval in milliseconds between the reception of a packet to BS or SS on its network
interface/Convergence Sublayer (CS) and the arrival of packet to its RF interface or the peer device. This
value represents a service commitment.
interface/Convergence Sublayer (CS) and the arrival of packet to its RF interface or the peer device. This
value represents a service commitment.
must be any integer value between 0 and 65535. Maximum latency set to zero means no
commitment available for this service flow.
Default: 0 (disabled)
Specifies the minimum traffic rates in bits per second, reserved for a service flow.
Specifies the minimum traffic rates in bits per second, reserved for a service flow.
must be any integer value between 0 and 65535. Minimum reserved traffic
rate set to zero means no minimum traffic rate reservation is required for this service flow.
Configures the maximum sustained traffic rate in bits per second for traffic schedule.
must be an integer between 1 and 65535.
Default: 0 (disabled)
Specifies the maximum burst size in bits that must be maintained for the service.
Specifies the maximum burst size in bits that must be maintained for the service.
must be any integer value between 0 and 65535. Maximum traffic burst set to zero means no
maximum traffic burst reservation is required for this service flow.
Default: 49
Specifies the length of the Service Data Unit (SDU) in bytes for a fixed-length SDU service flow.
Specifies the length of the Service Data Unit (SDU) in bytes for a fixed-length SDU service flow.
must be any integer value between 1 and 65535.
Important:
This parameter is used only if packing is on and the service flow is indicated as carrying fixed-length
SDUs.
Specifies the maximum delay variation (jitter) allowed for the connection.
must be any integer value between 1 and 65535.
Default: 0 (disabled)
This optional keyword specifies the traffic priority.
This optional keyword specifies the traffic priority.
must be an integer from 0 to 7.