Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Border Gateway Protocol Configuration Mode Commands
▀ address-family ipv4
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
address-family ipv4
Configures the IPv4 Address Family information for the specified BGP AS number. Optionally it also enables the VRF
routing information, if specified.
routing information, if specified.
Product
PDSN, GGSN
Privilege
Security Administrator, Administrator
Syntax
This keyword removes the configured IPv4 address family VRF mode for specific BGP AS number.
This optional keyword enables the exchange of VRF routing informaiton. When this keyword is specified
with this command then the address family mode changed to VRF address family mode for specific BGP AS
number.
with this command then the address family mode changed to VRF address family mode for specific BGP AS
number.
Important:
The route distinguigher id must be configured for this VRF name through
command in BGP VRF Configuration mode, before using this keyword.
Usage
Use this command to configure the IPv4 BGP address family configuration parameters for BGP router and
optionally enables the exchange of VRF routing information. This command is also used to switch the
command mode to enter the BGP Address Family Configuration Mode.
Use of
optionally enables the exchange of VRF routing information. This command is also used to switch the
command mode to enter the BGP Address Family Configuration Mode.
Use of
command swithces the command mode to BGP Address Family
Configuraiton Mode and prompt will be changed to the following:
Use of
command swithces the command mode to BGP
Address Family Configuraiton Mode and prompt will be changed to the following:
Example
Use following command to enter the IPv4 BGP Address-Family configuration mode:
Use following command to enter the IPv4 BGP Address-Family configuration mode: