Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
APN Configuration Mode Commands
ppp ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
ppp
Configures the Point-to-Point Protocol (PPP) options for the current APN.
Syntax
GGSN, P-GW
Privilege
Security Administrator, Administrator
Resets the option specified to its default setting.
Default: all protocols enabled
Configures the data compression or the compression protocol to use for the APN.
Configures the data compression or the compression protocol to use for the APN.
: Sets the compression mode to one of the following:
normal: Packets are compressed using the packet history for automatic adjustment and for best
compression.
stateless: Each packet is compressed individually.
: Sets the compression protocol to one of the following:
deflate: DEFLATE algorithm
mppc: Microsoft Point-to-Point Compression
stac: STAC LZS algorithm
Default: 30
Specifies the frequency of sending the Link Control Protocol (LCP) keep alive messages.
Specifies the frequency of sending the Link Control Protocol (LCP) keep alive messages.
must be
either 0 or in the range from 5 to 14400.
The special value 0 disables the keep alive messages entirely.
The special value 0 disables the keep alive messages entirely.
Default: 128
Specifies the smallest packet to which compression may be applied.
Specifies the smallest packet to which compression may be applied.
must be a value in the
range from 0 to 2000.
Default: 1500
Specifies the maximum transmission unit (MTU) for packets accessing the APN.
Specifies the maximum transmission unit (MTU) for packets accessing the APN.
must be a
value in the range from 100 to 2000.