Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
APN Configuration Mode Commands
▀ timeout long-duration
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
timeout long-duration
Configures the long duration timeout and inactivity duration for subscriber session.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Indicates the timeout specified is to be returned to its default behavior. If no specific timeout is specified then
all are set to their default behavior.
all are set to their default behavior.
Default: 0
Designates the maximum duration of the session, in seconds, before the system automatically
reports/terminates the session.
Specifies the maximum amount of time, in seconds, before the specified timeout action is activated.
Designates the maximum duration of the session, in seconds, before the system automatically
reports/terminates the session.
Specifies the maximum amount of time, in seconds, before the specified timeout action is activated.
must be a value in the range from 0 through 4294967295.
The special value 0 disables the timeout specified.
Specifies the maximum amount of time, in seconds, before the specified session is marked as dormant.
must be a value in the range from 0 through 4294967295.
The special value 0 disables the inactivity time specified.
Usage
Use this command to set the long duration timeout period and inactivity timer for subscriber session. Reduce
the idle timeout to free session resources faster for use by new requests.
Refer to the
the idle timeout to free session resources faster for use by new requests.
Refer to the
and
command in this chapter for additional information.
Example
Following command sets the long duration timeout duration to 300 seconds and inactivity timer for subscriber session to
45 seconds.
Following command sets the long duration timeout duration to 300 seconds and inactivity timer for subscriber session to
45 seconds.