Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
BITS Port Configuration Mode Commands
▀ snmp trap link-status
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
snmp trap link-status
Enables/disables the generation and sending of an SNMP (notification) trap when the port experiences a change of state
(up or down).
(up or down).
Product
All
Privilege
Security Administrator, Administrator
Syntax
Disables the sending of traps for link-status changes.
Usage
Enable the sending of link-status change traps if there is a monitoring facility that can use the information or
if there are troubleshooting activities in progress.
if there are troubleshooting activities in progress.
Example
Use this command to enable sending of link-status SNMP traps:
Use this command to enable sending of link-status SNMP traps:
Use this command to disable sending of link-status SNMP traps: