Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Border Gateway Protocol Address-Family Configuration Mode Commands
▀ neighbor
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
neighbor
This command configures BGP routers that interconnect to non-broadcast networks and enables the exchange of routing
information with a peer router (neighbor). Note that a remote AS number must be specified for a neighbor before other
parameters can be configured.
information with a peer router (neighbor). Note that a remote AS number must be specified for a neighbor before other
parameters can be configured.
Product
PDSN, GGSN
Privilege
Security Administrator, Administrator
Syntax
Delete the specified parameter from the router configuration.
Specifies the IP address of the peer router (neighbor).
Enable the exchange of routing information with this neighbor.
Specify the AS number of the BGP neighbor.
: The neighbor‘s autonomous system number. must be an integer from 1 through 65535.
This keyword sends the extended community attributes to a peer router (neighbor).
Usage
Use this command to enable the exchange of routing information with a peer router. The chassis supports a
maximum of 64 peers per context.
maximum of 64 peers per context.
Example
The following command specifies that the neighbor at the IP address 192.168.100.25 has an AS number of 2000:
The following command specifies that the neighbor at the IP address 192.168.100.25 has an AS number of 2000: