Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Border Gateway Protocol Configuration Mode Commands
network ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
network
Specify a network to announce via BGP
Product
HA
Privilege
Security Administrator, Administrator
Syntax
[
]
Delete the specified network from the configuration for the BGP router.
Specifies the IP address and netmask bits for the network to announce via BGP.
is a network
IP address (in dotted-decimal notation) and
is the number of subnet bits, representing a subnet mask in
shorthand. These must be entered in the dotted-decimal notation/subnet bits format (1.1.1.1/24).
Filter routes through the specified route map before announcing the network. map_name specifies the name
of the route-map to use and must be specified as a string of 1 through 79 alphanumeric characters.
of the route-map to use and must be specified as a string of 1 through 79 alphanumeric characters.
Usage
Use this command to specify a network to announce via BGP.
Example
The following command announces the network 192.168.0.0 with a netmask of 16 via BGP:
network 192.168.0.0/16
The following command removes the network from the BGP router configuration:
The following command announces the network 192.168.0.0 with a netmask of 16 via BGP:
network 192.168.0.0/16
The following command removes the network from the BGP router configuration:
192.168.0.0/16