Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Context Configuration Mode Commands
aaa filter-id rulebase mapping ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
aaa filter-id rulebase mapping
This command configures the system to use value of the Filter-Id AVP as the ACS rulebase name.
Product
ACS
Privilege
Security Administrator, Administrator
Syntax
Disables the mapping of Filter-Id AVP and ACS rulebase name.
Configures the default setting.
Default: Disabled
Default: Disabled
Usage
Use this command to enable the mapping of Filter-Id attribute‘s value returned during RADIUS
authentication as the ACS rulebase name.
This feature provides the flexibility for operator to transact between multi-charging-service support for
postpaid and prepaid subscribers through Access Control Lists (ACLs) entered in AAA profiles in RADIUS
server to single-charging-service system based on rulebase configuration for postpaid and prepaid
subscribers.
This feature internally maps the received ACL in to rulebase name and configures subscriber for postpaid or
prepaid services accordingly.
When this feature is enabled and ACS rulebase attribute is not received from RADIUS or not configured in
local default subscriber template system copies the filter-id attribute value to ACS rulebase attribute.
This copying happens only if the filter-id is configured and received from RADIUS server and ACS rulebase
is not configured in ACS or not received from RADIUS.
authentication as the ACS rulebase name.
This feature provides the flexibility for operator to transact between multi-charging-service support for
postpaid and prepaid subscribers through Access Control Lists (ACLs) entered in AAA profiles in RADIUS
server to single-charging-service system based on rulebase configuration for postpaid and prepaid
subscribers.
This feature internally maps the received ACL in to rulebase name and configures subscriber for postpaid or
prepaid services accordingly.
When this feature is enabled and ACS rulebase attribute is not received from RADIUS or not configured in
local default subscriber template system copies the filter-id attribute value to ACS rulebase attribute.
This copying happens only if the filter-id is configured and received from RADIUS server and ACS rulebase
is not configured in ACS or not received from RADIUS.
Example
Following command enables the mapping value of the Filter-Id attribute to ACS rulebase name:
Following command enables the mapping value of the Filter-Id attribute to ACS rulebase name: