Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Context Configuration Mode Commands
iups-service ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
iups-service
This command creates an Iu-PS service instance and enters the Iu-PS Service Configuration Mode. This mode defines
the configuration and usage of Iu-PS interfaces between the SGSN and the RNCs in the UMTS radio access network
(UTRAN) and defines both the control plane (GTP-C) and the data plane (GTP-U) between these nodes.
the configuration and usage of Iu-PS interfaces between the SGSN and the RNCs in the UMTS radio access network
(UTRAN) and defines both the control plane (GTP-C) and the data plane (GTP-U) between these nodes.
Important:
For details about the commands and parameters for this mode, check the IuPS Service Configuration
Mode chapter.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Remove the configuration for the specified Iu-PS service from the configuration for the current context.
A unique string of 1 to 63 alphanumeric characters that identify the specific IuPS service.
Usage
Use this command to create, edit, or remove an Iu-PS service. Add up to 8 definitions to be used with a single
SGSN service so the SGSN can support multiple PLMNs.
SGSN service so the SGSN can support multiple PLMNs.
Example
The following command creates an Iu-PS service named
The following command creates an Iu-PS service named
:
The following command removes the Iu-PS service named
: