Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Exec Mode Commands (A-C)
card lc switch ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
card lc switch
This is the command for managing the line cards and their active/standby status.
Product
All
Privilege
Security Administrator, Administrator, Operator
Syntax
Indicates the card which is to become the active card specified as
.
Indicates that the command is to execute without any additional prompt and confirmation from the user.
Usage
Line card switch overs change the active/standby status of a line card. This is useful when there is a
maintenance activity on the active card which requires removing the card from service.
maintenance activity on the active card which requires removing the card from service.
Caution:
Caution should be taken in using this command. Depending on the amount of bandwidth/traffic being
switched, some subscribers may experience service interruptions.
Important:
This command is not supported on all platforms.
Example
The following command switches the active/standby status of the line cards where one of the cards is in slot
The following command switches the active/standby status of the line cards where one of the cards is in slot
. This
command only executes after the user provides confirmation of the request.
The following switches the active/standby status of the line cards where one of the cards is in slot
. This command
executes immediately with no additional user confirmation.