Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Exec Mode Commands (A-C)
card spio ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
card spio
This is the command for managing the switch processor I/O cards and their active/standby status.
Product
All
Privilege
Security Administrator, Administrator, Operator
Syntax
The slot number of the SPIO card that you want to switch to be the active card. The currently active SPIO
card is put in standby mode and the SPIO card in the specified slot number is made active.
card is put in standby mode and the SPIO card in the specified slot number is made active.
Indicates that the command is to execute without any additional prompt and confirmation from the user.
Usage
Switch over changes the active/standby status of a SPIO card. This is useful when there is a maintenance
activity on the active card which requires removing the card from service.
activity on the active card which requires removing the card from service.
Important:
This command is not supported on all platforms.
Example
The following command switches the active/standby status of the switch processor I/O cards. This command only
executes after the user provides confirmation of the request.
The following command switches the active/standby status of the switch processor I/O cards. This command only
executes after the user provides confirmation of the request.
The following switches the active/standby status of the switch processor I/O cards. This command executes immediately
with no additional user confirmation.
with no additional user confirmation.