Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Exec Modes Commands (D-S)
debug ip ospf event ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
debug ip ospf event
This command enables debugging of OSPF protocol events. If logging is enabled, results are sent to the logging system.
If no keywords are specified, all events are enabled for debugging.
If no keywords are specified, all events are enabled for debugging.
Product
PDSN, HA, GGSN
Privilege
Security Administrator, Administrator, Operator
Syntax
Disable debugging the specified OSPF event. If no keywords are specified, all events are disabled.
Specifies debugging of ABR events.
Specifies debugging of ASBR events.
Specifies debugging of VL events.
Specifies debugging of link state advertisement (LSA) events.
Specifies debugging of OS events.
Specifies debugging of router events.
Usage
Use this command to output debug information for OSPF events.
Example
To enable all event debug information, enter the following command;
To enable all event debug information, enter the following command;
To disable all event debug information, enter the following command;