Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Exec Mode (T-Z)
update cscf ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
update cscf
This command will cause a NOTIFY to be triggered from S-CSCF with contact event as ―shortened‖ and indicating the
expiry timer value for each contact as ―reauthentication-time‖ provided from CLI. The subscriber is supposed to send a
fresh REGISTER message within ―reauthentication-time‖, which will be challenged by S-CSCF in order to accomplish
reauthentication. If reauthentication does not occur/fails, the subscriber will be cleared after ―reauthentication-time‖.
expiry timer value for each contact as ―reauthentication-time‖ provided from CLI. The subscriber is supposed to send a
fresh REGISTER message within ―reauthentication-time‖, which will be challenged by S-CSCF in order to accomplish
reauthentication. If reauthentication does not occur/fails, the subscriber will be cleared after ―reauthentication-time‖.
Product
SCM (S-CSCF)
Privilege
Administrator
Syntax
Updates cscf subscriber data.
all: Updates data for all subscribers within a specified S-CSCF service.
username
all: Updates data for all subscribers within a specified S-CSCF service.
username
: Name of specific user within current context. can be between 1 and 127 alpha and/or
numeric characters and is case sensitive.
Specific configured S-CSCF service.
can be between 1 and 63 alpha and/or numeric
characters and is case sensitive.
Specify the time within which subscriber is expected to reauthenticate.
must be an integer from 1
to 86400 seconds.
Show detailed information.
Usage
This command is only applicable for an S-CSCF service.
Important:
reauthentication-time should be greater than the current expiry time of the contact so that S-CSCF
will initiate the NOTIFY message.
Example
The following command sets the reauthentication time for all CSCF subscribers in the
The following command sets the reauthentication time for all CSCF subscribers in the
S-CSCF service to
seconds: