Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Exec Mode Show Commands (A-C)
▀ show active-charging rulebase
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
show active-charging rulebase
This command shows information for rulebases.
Product
ACS
Privilege
Security Administrator, Administrator, Operator, Inspector
Syntax
Displays details of all rulebases configured in the system.
Displays details of the specified rulebase.
must be the name of a rulebase, and must be an alpha and/or numeric string of 1 through
63 characters in length.
Displays details of all or the specified rulebase configured in the specified ACS service.
must be the name of the ACS service, and must be an alpha an/or numeric string of 1
through 15 characters in length.
Displays statistical information for all or the specified rulebase.
Specifies that output of this command is to be piped (sent) to the command specified. A command to send the
output to must be specified.
For details on the usage of
output to must be specified.
For details on the usage of
and
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter.
Usage
Use this command to view various statistics for a specific charging rulebase.
Example
The following command displays active charging rulebase statistics.
The following command displays active charging rulebase statistics.
The following command displays configurations and statistics for a rulebase named
.