Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Exec Mode Show Commands (A-C)
▀ show active-charging timedef
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
show active-charging timedef
This command displays the details of timeslots configured in specified time definition(s).
Important:
This command is only available in StarOS 8.1 and in StarOS 9.0 and later.
Product
ACS
Privilege
Security Administrator, Administrator, Operator, Inspector
Syntax
Displays information for all timedefs configured in the service.
Displays detailed information for the specified timedef.
must be the name of a timedef, and must be an alpha and/or numeric string of 1 through 63
characters in length.
Displays information for all or a specific timedef configured in the specified ACS service.
must be the name of the ACS service, and must be an alpha and/or numeric string of
1 through 15 characters in length.
Specifies that output of this command is to be piped (sent) to the command specified. A command to send the
output to must be specified.
For details on the usage of
output to must be specified.
For details on the usage of
and
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter.
Usage
Use this command to view details of timeslots configured in specified timedef(s) that have been configured
for the Time-of-Day Activation/Deactivation of Rules feature.
for the Time-of-Day Activation/Deactivation of Rules feature.
Example
The following command displays timeslot details of all timedefs configured in the ACS service:
The following command displays timeslot details of all timedefs configured in the ACS service: