Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Exec Mode Show Commands (A-C)
▀ show crypto ikev1
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
show crypto ikev1
Displays pre-shared key information for peer security gateways configured within the context.
Product
PDSN, GGSN
Privilege
Security Administrator, Administrator, Operator, Inspector
Syntax
Specifies the IKE pre-shared key information based on the peer security gateway.
Specifies the IKE policy priority for which configuration information will be displayed.
The priority can be configured to any integer value from 1 to 100.
If no preference is specified, information will be displayed for all configured policies.
The priority can be configured to any integer value from 1 to 100.
If no preference is specified, information will be displayed for all configured policies.
Specifies that established IPSec SA information should be displayed.
Usage
Use this command to:
Display pre-shared key information. This information can be used to verify configuration and/or for
troubleshooting.
Verify the configuration of IKE policies within the context.
Display established IPSec SA information. This information can be used for troubleshooting.
Example
The following command lists the pre-shared keys received from peer security gateways as part of the Diffie-Hellman
exchange:
The following command lists the pre-shared keys received from peer security gateways as part of the Diffie-Hellman
exchange:
The following command displays information for an IKE policy with a preference of 1:
The following command displays the currently established SAs: