Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Exec Mode Show Commands (M-P)
show pdg-service statistics ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
show pdg-service statistics
Displays statistics for the PDG/TTG since the last restart or clear command. The output includes the number of each
type of protocol message. For example, the output includes the various types of EAP messages.
type of protocol message. For example, the output includes the various types of EAP messages.
Product
PDG/TTG
Privilege
Security Administrator, Administrator, Operator, Inspector
Syntax
Displays statistics for the specified PDG service.
must from 1 to 63 alpha and/or numeric characters.
Displays statistics for a specific subscriber with the specified WLAN IPv4 address.
must be entered in standard IPv4 dotted decimal notation.
Indicates the output of the command is to be piped (sent) to the command specified. A command to send
output to must be specified.
For details on the usage of
output to must be specified.
For details on the usage of
and
, refer to the Regulating a Command‘s Output section of the
Command Line Interface Overview chapter in the Cisco ASR 500 Series Command Line Interface Reference.
Usage
Use this command to display PDG service statistics.
Example
The following command displays statistics for all active PDG services:
The following command displays statistics for all active PDG services: