Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
FA Service Configuration Mode Commands
ip local-port ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
ip local-port
Configures the local User Datagram Protocol (UDP) port for the Pi interfaces‘ IP socket on which to listen for Mobile
IP Registration messages.
IP Registration messages.
Product
PDSN, ASN GW, GGSN
Privilege
Security Administrator, Administrator
Syntax
Specifies the UDP port number.
port# can be any integer value between 1 and 65535.
port# can be any integer value between 1 and 65535.
Usage
Specify the UDP port that should be used for communications between the FA service and the HA.
The system is shipped from the factory with the local port set to 434.
The system is shipped from the factory with the local port set to 434.
Example
The following command specifies a UDP port of 3950 for the FA service to use to communicate with the HA on the Pi
interface:
The following command specifies a UDP port of 3950 for the FA service to use to communicate with the HA on the Pi
interface: