Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Firewall-and-NAT Policy Configuration Mode Commands
firewall tcp-first-packet-non-syn ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
firewall tcp-first-packet-non-syn
This command configures Stateful Firewall action on TCP flows starting with a non-SYN packet.
Important:
In StarOS 9.0, this command is deprecated. This configuration is available as the
command.
Product
FW
Privilege
Security Administrator, Administrator
Syntax
Configures the default setting.
Default:
Default:
Specifies to drop the non-SYN packet.
Specifies to send reset.
Usage
Use this command to configure Stateful Firewall action on TCP flows starting with a non-SYN packet.
Example
For flows starting with a non-SYN packet, the following command specifies Stateful Firewall to drop the non-SYN
packet:
For flows starting with a non-SYN packet, the following command specifies Stateful Firewall to drop the non-SYN
packet: