Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Global Configuration Mode Commands
arp ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
arp
Configures a system-wide time interval for performing Address Resolution Protocol (ARP) refresh.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Restores the parameter to its default setting.
Default: 30
Specifies the ARP refresh interval (in seconds). The range is 30 to 86400 seconds.
Specifies the ARP refresh interval (in seconds). The range is 30 to 86400 seconds.
Usage
Use this command to configure a system-wide ARP refresh interval. Once a neighbor is found, the entry is
considered valid for at least a random value between the
considered valid for at least a random value between the
/2 and the
*1.5.
Example
The following command configures an ARP refresh interval of 1 hour:
The following command configures an ARP refresh interval of 1 hour: