Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
GRE Tunnel Interface Configuration Mode Commands
▀ destination
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
destination
This command configures the destination IPv4 address of the tunnel by specifying the IPv4 destination end address.
This is a mandatory configuration for GRE tunnel interface.
This is a mandatory configuration for GRE tunnel interface.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Removes/disassociates the configured destination IP address from specific GRE tunnel interface
configuration.
configuration.
Configures the IP address for the interface specifying the IPv4 IP address.
must be specified using the standard IPv4 dotted decimal notation.
Usage
Use this command to configure the destination IPv4 address of the tunnel by specifying the IP address of
destination tunnel end for GRE tunnel interface.
destination tunnel end for GRE tunnel interface.
Important:
State of source address will affect the operational state of the tunnel.
Example
The following command sets the 1.2.3.4 as destination IP address of the GRE tunnel interface:
The following command sets the 1.2.3.4 as destination IP address of the GRE tunnel interface: