Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
HSGW Service Configuration Mode Commands
▀ spi remote-address
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
spi remote-address
Configures the security parameter index (SPI) between the HSGW service and the eAN/ePCF. This command also
configures the redirection of call based on the PCF zone.
configures the redirection of call based on the PCF zone.
Product
HSGW
Privilege
Administrator
Syntax
: Specifies the IP address of the ePCF.
is an IP address expressed
in IPv4 dotted decimal notation or IPv6 colon separated notation.
: Specifies the IP address of the PCF and specifies the IP address network mask
bits.
must be specified using the form ‗IP Address/Mask Bits‘ where the IP
address must either be an IPv4 address expressed in dotted decimal notation or an IPv6 address expressed in
colon separated notation and the mask bits are a numeric value which is the number of bits in the subnet
mask.
colon separated notation and the mask bits are a numeric value which is the number of bits in the subnet
mask.
Specifies the SPI (
) which indicates a security context between the PCF and the HSGW.
can be configured to any integer value between 256 and 4294967295.
Configures the shared-secret between the HSGW service and the PCF. The secret can be either encrypted or
non-encrypted.
non-encrypted.
: Specifies the encrypted shared key (
) between the
PCF and the HSGW service.
must be between 1 and 254 alpha and/or numeric characters and
is case sensitive.
: Specifies the shared key (secret) between the PCF and the HSGW services.
must be between 1 and 127 alpha and/or numeric characters and is case sensitive.
The
The
keyword is intended only for use by the chassis while saving configuration scripts. The
system displays the
keyword in the configuration file as a flag that the variable following the
keyword is the encrypted version of the plain text secret key. Only the encrypted secret key is saved
as part of the configuration file.
This is a description for the SPI.
must be an alpha and/or numeric string from 1 through 31
characters.