Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
IMS Sh Service Configuration Mode Commands
▀ diameter
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
diameter
This command configures Diameter parameters.
Product
PDIF, SCM
Privilege
Administrator
Syntax
Removes previously configured endpoint.
Configures parameters to the default value.
Specifies the dictionary to use.
: A custom dictionary
: The standard dictionary
Important:
SCM uses only the standard dictionary.
Selects an endpoint to use in the configuration.
must be the endpoint name, and must be an alpha and/or numeric string of 1 through 63 characters
in length.
Usage
The Diameter endpoint contains information on the peer names and IP addresses and port, and the local IP
address to use for Diameter.
You can have more than one Diameter endpoint configured on the chassis and the ims-sh-service needs to
know which Diameter endpoint to use. This command is to select the appropriate Diameter endpoint, even if
only one has been configured.
address to use for Diameter.
You can have more than one Diameter endpoint configured on the chassis and the ims-sh-service needs to
know which Diameter endpoint to use. This command is to select the appropriate Diameter endpoint, even if
only one has been configured.
Example
The following example selects a diameter endpoint
The following example selects a diameter endpoint