Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
LAC Service Configuration Mode Commands
▀ load-balancing
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
load-balancing
Configures how LNSs are selected for this LAC service.
Product
PDSN, GGSN
Privilege
Security Administrator, Administrator
Syntax
LNS selection is made without regard to prioritization, but in a sequential order that balances the load across
the total number of LNS nodes available.
the total number of LNS nodes available.
LNS selection is made based on the priority assigned in the Tunnel-Preference attribute. An example of this
method is three LNS nodes, with preferences of 1, 2, and 3 respectively. In this example, the RADIUS server
always tries the tunnel with a preference of 1 before using any of the other LNS nodes.
method is three LNS nodes, with preferences of 1, 2, and 3 respectively. In this example, the RADIUS server
always tries the tunnel with a preference of 1 before using any of the other LNS nodes.
Default: Enabled
LNS selection is random in order, wherein the RADIUS server does not use the Tunnel-Preference attribute
in determining which LNS to select.
LNS selection is random in order, wherein the RADIUS server does not use the Tunnel-Preference attribute
in determining which LNS to select.
Usage
Use this command to configure the load-balancing algorithm that defines how the LNS node is selected by
the LAC when there are multiple peer LNSs configured in the LAC service.
the LAC when there are multiple peer LNSs configured in the LAC service.
Example
The following command sets the LAC service to connect to LNSs in a sequential order;
The following command sets the LAC service to connect to LNSs in a sequential order;
The following command sets the LAC service to connect to LNSs according to the priority assigned through the Tunnel-
Preference attribute:
Preference attribute: