Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Linkset Configuration Mode Commands
self-point-code ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
self-point-code
This command defines the SS7 network point-code to identify this SGSN.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Point-code is an SS7 address for an element in the SS7 network. Point-codes must be defined in dotted-
decimal format in a string of 1 to 11 digits. Format options include:
decimal format in a string of 1 to 11 digits. Format options include:
0.0.1 to 7.255.7 for point-code in the ITU range.
0.0.1 to 255.255.255 for point-code in the ANSI range.
0.0.1 to 15.31.255 for point-code in the TTC range.
a string of 1 to 11 digits in dotted-decimal to represent a point-code in a different range.
Removes the self-point-code configuration for this linkset in the SS7 routing domain.
Important:
Removing the self-point-code will result in the termination of all traffic on this link.
Usage
Use this command to define the SS7 point-code to identify this system.
Example