Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
LMA Service Configuration Mode Commands
▀ revocation
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
revocation
Enables the MIP revocation feature and configures revocation parameters.
Product
P-GW
Privilege
Administrator
Syntax
Resets the keyword to its default value.
Disables revocation for this service.
Default: disabled
Enables the MIP registration revocation feature for the LMA service. When enabled, if revocation is
negotiated with a MAG and a MIP binding is terminated, the LMA can send a Revocation message to the
MAG. This feature is disabled by default.
Enables the MIP registration revocation feature for the LMA service. When enabled, if revocation is
negotiated with a MAG and a MIP binding is terminated, the LMA can send a Revocation message to the
MAG. This feature is disabled by default.
Default: 3
The maximum number of retransmissions of a Revocation message before the revocation fails.
The maximum number of retransmissions of a Revocation message before the revocation fails.
must
be an integer value from 0 through 10.
Default: 3000
The number of milliseconds to wait for a Revocation Acknowledgement from the MAG before retransmitting
the Revocation message.
The number of milliseconds to wait for a Revocation Acknowledgement from the MAG before retransmitting
the Revocation message.
must be an integer value from 500 through 10000.
Usage
Use this command to enable or disable the MIP revocation feature on the LMA or to change settings for this
feature.
feature.
Example
The following command sets the maximum number of retries for a Revocation message to :
The following command sets the maximum number of retries for a Revocation message to :