Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Loopback Interface Configuration Mode Commands
ip address ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
ip address
Use this command to configure the IP options for the current interface.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Deletes the IP address you specify from the interface configuration.
Configures the IP address and network mask for the interface.
Enter an
Enter an
to specify an IP address and the subnet mask pair that identifies the IP
address of the interface. For
, specify with standard IPv4 dotted decimal notation. Currently,
the only value accepted for ip_mask is 255.255.255.255.
For the network mask,
For the network mask,
, enter the IP address and the length in bits of the network
mask in dotted decimal notation and a mask (192.168.1.0/32). Currently, the only value accepted for
bit_mask is 32.
Use the
bit_mask is 32.
Use the
keyword ito configure a secondary IP address on the interface. This is referred to as
multi-homing of the interface.
Use the
Use the
keyword to activate the IP address for Interchassis Session Redundancy.
Usage
Create and manage loopback interfaces for the current context.
Example
The following command configures IP address to associate with the interface:
ip address
The following command configures IP address to associate with the interface:
ip address
The following command removes the associated IP address for the interface:
no ip address
no ip address