Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
MME Service Configuration Mode Commands
s1-mme sctp port ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
s1-mme sctp port
This command configures the source SCTP port that will be used for binding the SCTP socket to communicate with the
eNodeB using S1AP with this MME service.
eNodeB using S1AP with this MME service.
Product
MME
Privilege
Security Administrator, Administrator
Syntax
Sets the SCTP port to default value of 699 to communicate with the eNodeBs using S1-MME interface.
Specifies the SCTP port number to communicate with the eNodeBs using S1-MME interface.
must be an integer between 1 through 65535.
Usage
Use this command to assign the SCTP port with SCTP socket to communicate with the eNodeB using S1AP.
A maximum of one SCTP port can be associated with one MME service.
A maximum of one SCTP port can be associated with one MME service.
Example
The following command sets the default SCTP port number 699 for to interact with eNodeB using S1AP on S1-MME
interface:
The following command sets the default SCTP port number 699 for to interact with eNodeB using S1AP on S1-MME
interface: