Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
P-GW Service Configuration Mode Commands
▀ fqdn
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
fqdn
Configures a Fully Qualified Domain Name for this P-GW service used in messages between the P-GW and a 3GPP
AAA server over the S6b interface.
AAA server over the S6b interface.
Product
P-GW
Privilege
Administrator
Syntax
Returns the command to the default setting of ―null‖.
Remove the configured FQDN from this services configuration.
Specifies the domain name of the P-GW service.
must be from 1 to 255 alpha and/or
numeric characters.
Specifies the realm name of the P-GW service.
must be from 1 to 255 alpha and/or numeric
characters.
Usage
Use this command to identify the P-GW service using an FQDN required when sending messages over the
S6b interface to a 3GPP AAA server.
S6b interface to a 3GPP AAA server.
Important:
In order to properly interact with other nodes in the network, the FQDN should be 96 alpha and/or
numeric characters or less.
Topology Matching (eHRPD only)
You may specify which P-GW you wish an HSGW interface to connect with by enabling topology matching
within the FQDNs for both the HSGW service and P-GW service. Topology matching selects geographically
closer nodes and reduces backhaul traffic for a specified interface.
The following optional keywords enable or disable topology matching when added to the beginning of an
FQDN:
You may specify which P-GW you wish an HSGW interface to connect with by enabling topology matching
within the FQDNs for both the HSGW service and P-GW service. Topology matching selects geographically
closer nodes and reduces backhaul traffic for a specified interface.
The following optional keywords enable or disable topology matching when added to the beginning of an
FQDN:
.<
>.