Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
RS-232 Port Configuration Mode Commands
terminal ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
terminal
Configures the console port on the SPIO.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Default:
Specifies whether or not the console port is to use carrier detect when connecting to a terminal.
Specifies whether or not the console port is to use carrier detect when connecting to a terminal.
Default: 8
Specifies the number of data bits used to transmit and receive characters.
Specifies the number of data bits used to transmit and receive characters.
Default: none
Specifies how the flow of data is controlled between the SPIO and a terminal.
Specifies how the flow of data is controlled between the SPIO and a terminal.
Default: none
Specifies the type of error checking used on the port.
even - Enables error checking by setting the parity bit to 1 (if needed) making the number of 1s in the data
bits even.
none - Disables error checking.
odd - Enables error checking by setting the parity bit to 1 (if needed) making the number of 1s in the data bits
odd.
Specifies the type of error checking used on the port.
even - Enables error checking by setting the parity bit to 1 (if needed) making the number of 1s in the data
bits even.
none - Disables error checking.
odd - Enables error checking by setting the parity bit to 1 (if needed) making the number of 1s in the data bits
odd.
Default: 9600
Specifies the flow of data in bits per second between the console port and terminal.
Specifies the flow of data in bits per second between the console port and terminal.
Default: 1
Specifies the number of stop bits between each transmitted character.
Specifies the number of stop bits between each transmitted character.
Usage
Sets the SPIO‘s console port parameters for communication with the terminal device.