Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
SGSN Service Configuration Mode Commands
▀ admin-disconnect-behavior
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
admin-disconnect-behavior
This command defines some of the actions the SGSN will take during an Admin-Disconnect procedure.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Including this keyword in the configuration instructs the SGSN to clear subscriber contexts and the
subscription data database whenever the
subscription data database whenever the
command is issued (from the Exec
mode) for attached subscribers. As well, the SGSN will issue an appropriate Map-Purge-MS-Req to the HLR
if needed.
Default: disabled
if needed.
Default: disabled
Including this keyword defines which type of detach instruction to include in the Detach-Request message
during an Admin-Disconnect procedure. One of the following options must be included when this command
is entered:
during an Admin-Disconnect procedure. One of the following options must be included when this command
is entered:
Default: reattach-required
Including either
or
keyword in the command, instructs the SGSN to use the default value for
the specified parameter.
Usage
Include the
keyword with this command configuration to ensure that more than
attached MM-context and active PDP-contexts are cleared when the clear
command is
issued for attached subscribers.
To clear subscription data for detached subscribers, refer to the
To clear subscription data for detached subscribers, refer to the
command described in the Exec mode chapter.
Including the
keyword with this command instructs the SGSN to include either a ‗reattach-
required‘ or a ‗reattach-no-required‘ instruction in the Detach-Request message.
Example