Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Subscriber Configuration Mode Commands
▀ npu qos
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
npu qos
Configures an NPU QoS priority queue for packets from the subscriber.
Product
PDSN, GGSN, ASN GW
Privilege
Security Administrator, Administrator
Syntax
Assigns the best-effort queue priority. This is the lowest priority.
Assigns the bronze queue priority. This is the third-highest priority.
Default: Enabled
Specifies that the priority is to be determined from the DS field in the packet's TOS octet.
Specifies that the priority is to be determined from the DS field in the packet's TOS octet.
Assigns the gold queue priority. This is the highest priority.
Assigns the silver queue priority. This is the second-highest priority.
Usage
This command is used in conjunction with the Network Processing Unit (NPU) Quality of Service (QoS)
functionality.
The system can be configured to determine the priority of a subscriber packet either based on the
configuration of thesubscriber, or from the differentiated service (DS) field in the packet's TOS octet
(representing the differentiated service code point (DSCP) value).
Refer to the System Administration and Configuration Guide for additional information on NPU QoS
functionality.
functionality.
The system can be configured to determine the priority of a subscriber packet either based on the
configuration of thesubscriber, or from the differentiated service (DS) field in the packet's TOS octet
(representing the differentiated service code point (DSCP) value).
Refer to the System Administration and Configuration Guide for additional information on NPU QoS
functionality.
Important:
This functionality is not supported for use with the PDSN at this time.
Example
The following command configures the subscriber‘s priority queue to be gold:
The following command configures the subscriber‘s priority queue to be gold: