Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
APN Configuration Mode Commands
bearer-control-mode ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
bearer-control-mode
This command enables/disables the bearer control mode for network controlled QoS (NCQoS) through this APN. It also
controls the sending of IE in GTP messages.
controls the sending of IE in GTP messages.
Product
GGSN, P-GW
Privilege
Security Administrator, Administrator
Syntax
Sets the bearer control mode to default mode of ―none‖.
Default: Disabled.
This keyword sets the bearer control mode to ―MS-only‖ mode. In this mode bearer will be controlled by
User Equipment (UE) side.
This keyword sets the bearer control mode to ―MS-only‖ mode. In this mode bearer will be controlled by
User Equipment (UE) side.
Default: Disabled.
This keyword sets the bearer control mode to ―Mixed‖ mode. In this mode bearer will be controlled by User
Equipment (UE) and network side (from GGSN) as well.
To enable network controlled QoS this option must be enabled.
This keyword sets the bearer control mode to ―Mixed‖ mode. In this mode bearer will be controlled by User
Equipment (UE) and network side (from GGSN) as well.
To enable network controlled QoS this option must be enabled.
Default: Enabled.
This keyword sets the bearer control mode to ―none‖ mode.
With BCM mode as none, system will not send any BCM mode information, BCM IE and BCM information
in protocol configuration option (PCO) IE, in GTPC messages sent by GGSN.
This command is useful in networks where AGWs/firewalls do not support unknown optional IEs in GTP
message.
This keyword sets the bearer control mode to ―none‖ mode.
With BCM mode as none, system will not send any BCM mode information, BCM IE and BCM information
in protocol configuration option (PCO) IE, in GTPC messages sent by GGSN.
This command is useful in networks where AGWs/firewalls do not support unknown optional IEs in GTP
message.
Usage
Use this command to enable the QoS through bearer control. This can be done either through MS side or from
GGSN and MS both. To enable network requested QoS user need to enable ―Mixed‖ mode for beaer control.
With this keyword operator can control sending of BCM information in GTPC messages from GGSN.
With MS-Only or Mixed options in this mode system sends BCM information element in every Create PDP
Context Response & Unknown PDP Context Request and Response message.
It is possible in some networks that AGWs/Firewall drops/rejects GTPC message if there is an Unknown
optional IE. To resolve this none option is used so operator can control sending of BCM IE and BCM
information in PCO IE in GTPC messages from GGSN.
GGSN and MS both. To enable network requested QoS user need to enable ―Mixed‖ mode for beaer control.
With this keyword operator can control sending of BCM information in GTPC messages from GGSN.
With MS-Only or Mixed options in this mode system sends BCM information element in every Create PDP
Context Response & Unknown PDP Context Request and Response message.
It is possible in some networks that AGWs/Firewall drops/rejects GTPC message if there is an Unknown
optional IE. To resolve this none option is used so operator can control sending of BCM IE and BCM
information in PCO IE in GTPC messages from GGSN.