Cisco Cisco Packet Data Interworking Function (PDIF) Fehlerbehebungsanleitung
HLR Configuration Mode Commands
acn-version-retention ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
acn-version-retention
This command configures the ACN version retention method.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Returns the configuration to the default value: retains the version information per IMSI prefix.
Retain ACN version information, for communication with the HLR, on a per IMSI prefix basis.
Retain ACN version information, for communication with the HLR, on a per buscriber basis.
Usage
By default, the SGSN sends ACN version 3 SAI (service area identity) to the HLR. If the SGSN receives an
error message indicating that the HLR does not support that version, then the SGSN tries again with an ACN
version 2 SAI. Next time the SGSN communicates with that HLR, it retains that version information and
version persists based on the IMSI prefix.
Use this command to enable the SGSN to retain version according to subscriber.
error message indicating that the HLR does not support that version, then the SGSN tries again with an ACN
version 2 SAI. Next time the SGSN communicates with that HLR, it retains that version information and
version persists based on the IMSI prefix.
Use this command to enable the SGSN to retain version according to subscriber.
Example
Configure the SGSN to retain version information according to the IMSI prefix:
Configure the SGSN to retain version information according to the IMSI prefix: