Cisco Cisco Packet Data Gateway (PDG) Wartungshandbuch
Diameter Attribute Definitions
▀ Attributes
▄ Cisco ASR 5000 Series AAA Interface Administration and Reference
OL-22955-01
Charging-Rule-Name-LI
Charging rule name for LI-Indicator-Gx.
AVP Header
1005 10415
Vendor ID
10415
VSA Type
1005
AVP Type
OCTETSTRING
Group Value
N/A
AVP Flag
M
Charging-Rule-Remove
Specifies the deactivated or removed Charging/Firewall rules from the Policy server. Charging/Firewall ruledefs for a
subscriber can be dynamically deactivated from gx server. If the incoming rule fails to match in the charging ruledefs of a
rulebase, then there will be a lookup with the Firewall ruledefs of the rulebase.
subscriber can be dynamically deactivated from gx server. If the incoming rule fails to match in the charging ruledefs of a
rulebase, then there will be a lookup with the Firewall ruledefs of the rulebase.
AVP Header
1002 10415
Vendor ID
10415
VSA Type
1002
AVP Type
GROUPED
Group Value
[CHARGING_RULE_NAME]
[CHARGING_RULE_BASE_NAME]
AVP Flag
M
Charging-Rule-Report
This AVP is used to report the status of a Policy and Charging Control (PCC) rule for installation successful/removal. It is
a reference for a specific PCC rule at the AGW that has been successfully installed, modified or removed because of
trigger from the MS. The PCC-Rule-Status AVP indicates the action being performed on the PCC rule. Multiple instances
of Charging-Rule-Report AVPs shall be used in the case it is required to report different PCCRule-Status values for
different groups of rules within the same Diameter command.
a reference for a specific PCC rule at the AGW that has been successfully installed, modified or removed because of
trigger from the MS. The PCC-Rule-Status AVP indicates the action being performed on the PCC rule. Multiple instances
of Charging-Rule-Report AVPs shall be used in the case it is required to report different PCCRule-Status values for
different groups of rules within the same Diameter command.
AVP Header