Cisco Cisco Packet Data Gateway (PDG) Wartungshandbuch
Generally Available 06-30-2010
Modified Commands
5-23
show active-charging sessions full all
This command displays statistics for Active Charging Service Sessions. The output of this
command includes the following new fields:
command includes the following new fields:
●
Client-IP
●
Current IPv6 Flows
●
Current ICMPv6 Flows
CLI (Exec Mode)
show active-charging sessions [ full [ wide ] | summary |
display-dynamic-charging-rules | dynamic-charging ] [ [ all ] | [
filters_keywords ] + ] [ | { grep grep_options | more } ]
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
show active-charging flows type
This command displays information on flows filtered by flow type of application protocol.
The ipv6 and icmpv6 options were added to this command.
The ipv6 and icmpv6 options were added to this command.
CLI (Exec Mode)
show active-charging flows type { dns | ftp | http | icmp | icmpv6 | imap |
ip | ipv6 | mms | p2p | pop3 | rtcp | rtp | rtsp | secure-http | sip | smtp
| tcp | udp | unknown | wsp-connection-less | wsp-connection-oriented } [
options ] [ | { grep grep_options | more } ]
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
show active-charging flows ip-address
This command displays active charging flows in a system or service. This command now
accepts IPv6 addresses.
accepts IPv6 addresses.
CLI (Exec Mode)
show active-charging flows { all | [ connected-time [ < | > | greater-than
| less-than ] seconds ] [ flow-id flow_id ] [ full ] [ idle-time [ < | > |
greater-than | less-than ] seconds ] [ ip-address [ server | subscriber ]
[ < | > | IPv4 | greater-than | less-than ] address ] [ nat { not-required
| required [ nat-ip nat_ip_address ] } ] [ port-number [ server | subscriber
] [ < | > | IPv4 | greater-than | less-than ] number ] [ rx-bytes [ < | > |
greater-than | less-than ] number ] [ rx-packets [ < | > | greater-than |
less-than ] number ] [ session-id session_id ] [ summary ] [ trans-proto {
icmp | tcp | udp } ] [ tx-bytes [ < | > | greater-than | less-than ] number
] [ tx-packets [ < | > | greater-than | less-than] number ] [ type flow_type
] } [ | { grep grep_options | more } ]
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.