Cisco Cisco Packet Data Gateway (PDG) Wartungshandbuch
Generally Available 06-30-2010
New Configuration Commands
3-9
port bits
Using this command enters the BITS port configuration mode which provides configuration
for the transmit timing source. The new BITS port configuration mode includes the
following commands:
for the transmit timing source. The new BITS port configuration mode includes the
following commands:
●
default
●
end
●
exit
●
mode
●
no
●
preferred slot
●
recover
●
shutdown
●
snmp trap link-status
CLI (Global Configuration Mode)
port bits slot#/port#>
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
radius accounting interim volume
This command configures the volume of uplink and downlink volume octet counts that
triggers RADIUS interim accounting. This command is now available for PDSN and HA
services.
triggers RADIUS interim accounting. This command is now available for PDSN and HA
services.
CLI (AAA Server Group Configuration Mode & Context Configuration Mode)
radius accounting interim volume { downlink bytes uplink bytes | total
bytes | uplink bytes downlink bytes }
no radius accounting interim volume
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
radius usage-reporting-algorithm
This command configures the usage reporting algorithm for RADIUS prepaid using DCCA.
CLI (Global Configuration Mode)
radius usage-reporting-algorithm { cumulative | relative }
default radius usage-reporting-algorithm
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.