Cisco Cisco Packet Data Gateway (PDG) Wartungshandbuch

Configuration Management

Generally Available 06-30-2010

3-70

SGSN Commands - New in Release 8.1

The following commands are new to the SGSN in Release 8.1:

apn-selection-default

New operator policy command has been added to enable and configure a default APN for
use when the normal APN selection process fails.

CLI (SGSN Operator Policy Configuration Mode)

apn-selection-default network-identifier <apn_net_id> [

require-subscription-apn network-identifier <apn_net_id>]

noapn-selection-default

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

check-imei-timeout-action

This command configures the action to be taken on the Gf interface if a Check-IMEI fails
due to a timeout.

CLI (SGSN or GPRS Service Configuration Modes)

check-imei-timeout-action [ continue | reject ]

default check-imei-timeout-action

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

clear gtpp storage-server local file statistics

This command clears the statistics for CDRs stored on the local SMC hard disk.

CLI (Exec Mode)

clear gtpp storage-server local file statistics [ group name name ]

clock-source

This command sets the source of the port’s transmit clock.

CLI (Port Channelized Configuration Mode)

clock-source { internal-timing | loop-timing }

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.