Cisco Cisco Packet Data Gateway (PDG) Wartungshandbuch

Generally Available 06-30-2010

Modified Configuration Commands

3-85

bcmcs

This command has been modified by adding the optional keyword

encrypted

so the

password

grppasswd

can be sent either encrypted or clear.

CLI (PDSN-Service Config Mode)

[ encrypted ] grppasswd group_passwd

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

cdr

This command configures the CDR file transfer parameters. The

transfer-mode

keyword

was enhanced to support EDR/UDR push via SPIO. Previously, the push was support only
via LC.

CLI (EDR Module Configuration Mode & UDR Module Configuration Mode)

cdr [ [ push-interval value ] [ remove-file-after-transfer ] [

transfer-mode { pull | push primary { encrypted-url enc_url | url url } [

via local-context ] [ secondary { encrypted-secondary-url enc_sec_url | url

sec_url } ] } ] + | use-harddisk ]

no cdr [ remove-file-after-transfer | use harddisk ] +

default cdr [ push-interval | remove-file-after-transfer | transfer-mode [

push via ] | use harddisk ] +

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

clear crypto

This command has been modified to clear all IKEv2 statistics for the current context, or to
clear statistics based on service ip address or service name.

CLI (Exec Mode)

clear crypto statistics { ikev2 [ service-ip-address ip-address |

service-name name ] }

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

framing

The ability to identify the path-type (either E1 or DS1/T1) has been added to the

framing

command for use with the CLC2 SONET or SDH configuration.

CLI (Channelized Port Configuration Mode)

framing { ethernet | sdh [ ds1 | e1 ] | sonet [ ds1 | e1 ] | unspecified }

[ -noconfirm ]

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.