Cisco Cisco Packet Data Gateway (PDG) Wartungshandbuch

Configuration Management

Generally Available    06-30-2010 

3-98

The 

non-tcp limit

 and 

 keywords were added to this command. This 

command can now also be used to limit the total number of flows per Subscriber/APN sent 
to a rulebase based on the protocol type.

flow limit-across-applications { limit | non-tcp limit | tcp

limit }

This functionality is not supported at this time on the Web Element Manager.

This command enables and configures bandwidth limits for Session Control functionality to 
the subscriber. The 

keyword is now optional.

peak-data-rate bps peak-burst-size bytes violate-action { discard | 

lower-ip-precedence } [ committed-data-rate bps committed-burst-size bytes 

This functionality is not supported at this time on the Web Element Manager.

This command defines rule definition to analyze and charge user traffic based on Internet 
Protocol (IP) destination address. The “

{ !range | range } host-pool host_pool

” 

option was added to this command. This enables the IP destination address to be selected 
from a range configured in a host pool.

[ no ] ip dst-address { operator { ip_address | ip_address/mask } | { !range 

| range } host-pool host_pool }

This functionality is not supported at this time on the Web Element Manager.

This command defines rule definition to analyze and charge user traffic matching the 
Internet Protocol (IP) address of the destination, i.e. from the subscriber, of the connection. 
The

 { !range | range } host-pool host_pool 

option was added to this command. 

This enables the IP address to be selected from a range configured in a host pool.

[ no ] ip server-ip-address { operator { ip_address | ip_address/mask } | { 

!range | range } host-pool host_pool }