Cisco Cisco Packet Data Gateway (PDG) Wartungshandbuch
Configuration Management
Generally Available 06-30-2010
3-108
CLI (Charging Action Configuration Mode)
flow limit-for-bandwidth { { direction { downlink | uplink } peak-data-rate
bps peak-burst-size bytes violate-action { discard | lower-ip-precedence }
[ committed-data-rate bps committed-burst-size bytes [ exceed-action {
discard | lower-ip-precedence } ] ] } | { id id } }
{ default | no } flow limit-for-bandwidth { direction { downlink | uplink }
| id }
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
icap server
This command adds an Internet Content Adaptation Protocol (ICAP) server configuration
to a Content Filtering Server Group. The
to a Content Filtering Server Group. The
priority
keyword was added to this command.
This enables specifying the priority of an ICAP server in a Content Filtering Server Group.
I
MPORTANT
The maximum outstanding request per ICAP connection configured using the optional
max
<max_msgs>
keyword is limited to one. Therefore, other values configured using the
max
keyword will be ignored.
CLI (Content Filtering Server Group Configuration Mode)
icap server ip_address
[ port port_number ] [ max msgs ] [ priority priority
]
no icap server ip_address [ port port_number ] [ priority priority ]
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
insert
This command configures the x-header fields to be inserted in HTTP GET and POST
request packets.
request packets.
The following keywords were added to this command:
●
customer-id
●
charging-characteristics
●
imei
The following keywords were moved from under
“
insert xheader_field_name
variable bearer
”
to under
“
insert xheader_field_name variable bearer 3gpp
”:
●
imsi
●
sgsn-address