Cisco Cisco Packet Data Gateway (PDG) Wartungshandbuch

Seite von 512
Configuration Management
Generally Available    06-30-2010 
3-154
SGSN Commands - Modified for Release 8.1
The following commands have been modified in Release 8.1
apn/apn-selection-default/wildcard-apn
To meet 3GPP TS23.003, the maximum length for the network-identifier for all APN 
definitions has been reduced from 63 characters to 62.
CLI (SGSN Operator Policy Configuration Mode)
apn { network-identifier apn_net_id | operator-identifier apn_op_id }
Web Element Manager Path
This expansion is not supported at this time on the Web Element Manager.
authenticate rau update-type
The 
authentica rau update-type 
command has been enhanced to include the 
with 
inter-rat-local-ptmsi 
qualifier to enable or disable (default) authentication for 
Inter-RAT RAUs.
CLI (SGSN Operator Policy Configuration Mode)
authenticate rau update-type { ra-update with inter-rat-local-ptmsi | 
combined-update with inter-rat-local-ptmsi | imsi-combined-update with 
inter-rat-local-ptmsi }
default authenticate rau update-type { ra-update | combined-update | 
imsi-combined-update }
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
frame-relay
This command configures the parameters for the Frame Relay connection, including the 
fractional channel.
CLI (Channelized Port Configuration Mode)
frame-relay path path_id { ds1 connects | e1 connects } 
timeslot slot# [ intf-type intf_type ] [ lmi_type lmi_type ]
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
gtpp storage-server local file 
New keyword 
purge-processed-files
 added in this command to configure the periodic, 
every 4 minutes, deletion of local processed (*.p) CDR files from the hard disk on SMC 
card. 
CLI (GTPP Group Configuration Mode)
gtpp storage-server local file { compression { gzip | none } | format { 
custom1 | custom2 | custom3 | custom4 | custom5 } | name prefix prefix |