Cisco Cisco Packet Data Gateway (PDG) Wartungshandbuch
Performance Management
Generally Available 06-30-2010
5-20
threshold nat-port-chunks-usage
This command configures the NAT port chunk utilization threshold settings.
CLI (Global Configuration Mode)
threshold nat-port-chunks-usage high_thresh [ clear low_thresh ]
default threshold nat-port-chunks-usage
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
threshold poll nat-port-chunks-usage
This command configures the polling interval over which to measure the NAT port chunks
usage thresholding value.
usage thresholding value.
CLI (Global Configuration Mode)
threshold poll nat-port-chunks-usage interval 30
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
snmp trap { enable | suppress } ThreshClearNATPortChunksUsage
This command enables/suppresses generation of the ThreshClearNATPortChunksUsage
trap.
trap.
CLI (Global Configuration Mode)
snmp trap enable ThreshClearNATPortChunksUsage
snmp trap suppress ThreshClearNATPortChunksUsage
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
snmp trap { enable | suppress } ThreshNATPortChunksUsage
This command enables/suppresses generation of the ThreshNATPortChunksUsage trap.
CLI (Global Configuration Mode)
snmp trap enable ThreshNATPortChunksUsage
snmp trap suppress ThreshNATPortChunksUsage
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.