Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Direct Tunnel
Direct Tunnel Configuration ▀
Cisco ASR 5000 Series Enhanced Feature Configuration Guide ▄
OL-22983-01
Disabling a Direct Tunnel to an RNC
To disable direct tunnel access to an RNC, use the following procedure:
Step 1
Enter the global configuration mode.
Step 2
Identify the context containing the IuPS service configuration for that RNC.
Step 3
Identify the IuPS service configuration.
Step 4
Identify the RNC configuration
Step 5
Disable the direct tunnel access for the RNC.
Example Configuration
The following is an example of the commands used to disable direct tunneling with an RNC:
Re-enabling a Direct Tunnel to an RNC
To re-enable a direct tunnel access to an RNC configured in an IuPS service configuration, use the following procedure:
Step 1
Enter the global configuration mode.
Step 2
Identify the context containing the IuPS service configuration for that RNC.
Step 3
Identify the IuPS service configuration.
Step 4
Identify the RNC configuration
Step 5
Re-enable the direct tunnel access for the RNC.
Example Configuration
The following is an example of the commands used to re-enable direct tunneling with an RNC: