Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Gx Interface Support
▀ Rel. 7 Gx Interface
▄ Cisco ASR 5000 Series Enhanced Feature Configuration Guide
OL-22983-01
Informtion AVP is present in the CCA-U, the monitoring will continue with the old threshold value and the reporting
happens when the threshold is breached again.
happens when the threshold is breached again.
Usage Monitoring at Session Level: PCRF subscribes to the session-level volume reporting over Gx by sending
the Usage-Monitoring-Information AVP with the usage threshold level set in Granted-Service-Unit AVP and
Usage-Monitoring-Level AVP set to SESSION_LEVEL(0). After the AVPs are parsed by DPCA IMSA
updates the information to ECS. Once ECS is updated usage monitoring is started and constantly checked with
the usage threshold whenever the data traffic is present.
Usage-Monitoring-Level AVP set to SESSION_LEVEL(0). After the AVPs are parsed by DPCA IMSA
updates the information to ECS. Once ECS is updated usage monitoring is started and constantly checked with
the usage threshold whenever the data traffic is present.
Usage Monitoring at Flow Level: PCRF subscribes to the flow-level volume reporting over Gx by sending the
Usage-Monitoring-Information AVP with the usage threshold level set in Granted-Service-Unit AVP and
Usage-Monitoring-Level AVP set to PCC_RULE_LEVEL(1). Monitoring Key is mandatory in case of a flow-
level monitoring since the rules are associated with the monitoring key and enabling/disabling of usage
monitoring at flow level can be controlled by PCRF using it. After the AVPs are parsed by DPCA, IMSA
updates the information to ECS. Once ECS is updated usage monitoring is started and constantly checked with
the usage threshold whenever the data traffic is present.
Usage-Monitoring-Level AVP set to PCC_RULE_LEVEL(1). Monitoring Key is mandatory in case of a flow-
level monitoring since the rules are associated with the monitoring key and enabling/disabling of usage
monitoring at flow level can be controlled by PCRF using it. After the AVPs are parsed by DPCA, IMSA
updates the information to ECS. Once ECS is updated usage monitoring is started and constantly checked with
the usage threshold whenever the data traffic is present.
Usage monitoring is supported for both predefined rules and dynamic rule definitions.
Usage Monitoring for Predefined Rules: If the usage monitoring needs to be enabled for the predefined
rules, PCRF sends the rule and the usage monitoring information containing the monitoring key and
the usage threshold. The Monitoring key should be same as the one pre-configured in PCEF for that
predefined rule. There can be multiple rules associated with the same monitoring key. Hence enabling
a particular monitoring key would result in the data being tracked for multiple rules having the same
monitoring key. After DPCA parses the AVPs IMSA updates the information to ECS. Once ECS is
updated usage monitoring is started and constantly checked with the usage threshold whenever the
data traffic is present.
the usage threshold. The Monitoring key should be same as the one pre-configured in PCEF for that
predefined rule. There can be multiple rules associated with the same monitoring key. Hence enabling
a particular monitoring key would result in the data being tracked for multiple rules having the same
monitoring key. After DPCA parses the AVPs IMSA updates the information to ECS. Once ECS is
updated usage monitoring is started and constantly checked with the usage threshold whenever the
data traffic is present.
Usage Monitoring for Dynamic Rules: If the usage monitoring needs to be enabled for dynamic
ruledefs, PCRF provides the monitoring key along with a charging rule definition and the usage
monitoring information containing the monitoring key and the usage threshold. This would result in
the usage monitoring being done for all the rules associated with that monitoring key. After DPCA
parses the AVPs, IMSA updates the information to ECS. Once ECS is updated, the usage monitoring
is started and constantly checked with the usage threshold whenever the data traffic is present.
Monitoring key for dynamic ruledef is dynamically assigned by PCRF which is the only difference
with predefined rules in case of usage monitoring.
monitoring information containing the monitoring key and the usage threshold. This would result in
the usage monitoring being done for all the rules associated with that monitoring key. After DPCA
parses the AVPs, IMSA updates the information to ECS. Once ECS is updated, the usage monitoring
is started and constantly checked with the usage threshold whenever the data traffic is present.
Monitoring key for dynamic ruledef is dynamically assigned by PCRF which is the only difference
with predefined rules in case of usage monitoring.
Usage Reporting
Usage at subscriber/flow level is reported to PCRF under the following conditions:
Usage Threshold Reached: PCEF records the subscriber data usage and checks if the usage threshold provided
by PCRF is reached. This is done for both session and rule level reporting.
For session-level reporting, the actual usage volume is compared with the usage volume threshold.
For rule-level reporting the rule that hits the data traffic is used to find out if the monitoring key is associated
with it, and based on the monitoring key the data usage is checked. Once the condition is met, it reports the
usage information to IMSA and continues monitoring. IMSA then triggers the CCR-U if ―USAGE_REPORT‖
trigger is enabled by the PCRF. The Usage-Monitoring-Information AVP is sent in this CCR with the ―Used-
Service-Unit‖ set to the amount of data usage by subscriber.
with it, and based on the monitoring key the data usage is checked. Once the condition is met, it reports the
usage information to IMSA and continues monitoring. IMSA then triggers the CCR-U if ―USAGE_REPORT‖
trigger is enabled by the PCRF. The Usage-Monitoring-Information AVP is sent in this CCR with the ―Used-
Service-Unit‖ set to the amount of data usage by subscriber.