Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
NAT Configuration
Configuring NAT ▀
Cisco ASR 5000 Series Network Address Translation Administration Guide ▄
OL-22992-01
If enabled, in the rulebase, a routing rule for the protocol must be configured. For example:
For RTSP NAT ALG processing, in the rulebase, the following command must be configured:
The
CLI command configures the Media Inactivity Timeout
setting. The timeout gets applied on RTP and RTCP media flows that are created for SIP calls. The timeout is
applied only on those flows that actually match the RTP and RTCP media pinholes that are created by the SIP
ALG.
applied only on those flows that actually match the RTP and RTCP media pinholes that are created by the SIP
ALG.
Configuration changes are only applied to new flows.
Configuring EDR Format
To configure EDR format for NAT-specific attributes, use the following configuration:
Configuring UDR Format
To configure UDR format for NAT-specific attributes, use the following configuration: