Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
show ip
show ip pool address pool-name ▀
Cisco ASR 5000 Series Statistics and Counters Reference ▄
OL-22990-02
show ip pool address pool-name
Table 221.
show ip pool address pool-name
Command Output Descriptions
Field
Description
Busyout
Defines whether or not the associated IP address is unavailable due to a busyout command having been
applied to the entire pool or a range of addresses within the pool.
applied to the entire pool or a range of addresses within the pool.
Status
Identifies the current condition of the IP address. Valid conditions are:
(F) - Free: IP address is available for use.
(U) - Used: IP address is currently in use and is unavailable.
(H) - Hold: IP address is unavailable and on hold for the subscriber that just disconnected in case a
reconnect occurs within the range of the
(F) - Free: IP address is available for use.
(U) - Used: IP address is currently in use and is unavailable.
(H) - Hold: IP address is unavailable and on hold for the subscriber that just disconnected in case a
reconnect occurs within the range of the
value configured in the
command.
(R) - Release: IP address is in the process of being released (from general use or the hold state).
(R) - Release: IP address is in the process of being released (from general use or the hold state).
Address
Displays the IP address.
NAI/MSID Hash
A 64-bit value identifying the subscriber‘s MN in order to reapply a specific IP address should the
subscriber return within the hold timer range.
subscriber return within the hold timer range.
Hold Timer
Specifies the amount of time, in seconds, that the IP address is placed on hold in the event that the
subscriber, who last used the address, reconnects.
subscriber, who last used the address, reconnects.
Session
Start/Disconnect
Start/Disconnect
Displays the session start time for IP addresses in use and the session disconnect time for IP addresses on
hold.
hold.