Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
show linecard
▀ show linecard table
▄ Cisco ASR 5000 Series Statistics and Counters Reference
OL-22990-02
show linecard table
Table 236.
show linecard table
Command Output Descriptions
Field
Description
Slot
DIsplays the chassis slot number and type. The slot type represents the type of card(s) that the slot supports. Possible
slot types are:
Slots 17 through 23, 26 through 39, and slots 42 through 48: Supports Ethernet 10/100, Ethernet 1000 linecard, four-
port Quad Gig-E (QGLC) line card (ASR 5000 only) 10 Gigabit Ethernet Line Card (XGLC) is a full-length line card.
Only upper slots 17 through 23 and 26 through 32 are used when referring to this card.Slots 24 and 25: Support the
Switch Processor Input/Output (SPIO) card
slot types are:
Slots 17 through 23, 26 through 39, and slots 42 through 48: Supports Ethernet 10/100, Ethernet 1000 linecard, four-
port Quad Gig-E (QGLC) line card (ASR 5000 only) 10 Gigabit Ethernet Line Card (XGLC) is a full-length line card.
Only upper slots 17 through 23 and 26 through 32 are used when referring to this card.Slots 24 and 25: Support the
Switch Processor Input/Output (SPIO) card
Card
Type
Type
Displays the type of card installed. The possible card types supported for this release are:
Ethernet 10/100 Line CardEthernet 1000 Line Card (QGLC)10 Gig Ethernet Line Card (XGLC)Switch Processor
Input/Output CardDS3 Line Card
Ethernet 10/100 Line CardEthernet 1000 Line Card (QGLC)10 Gig Ethernet Line Card (XGLC)Switch Processor
Input/Output CardDS3 Line Card
# Ports
Displays the maximum number of physical ports supported per card.
The Ethernet 10/100 Line Card supports 8 ports.The Ethernet 1000 Line Card supports 1 port.The Quad Gig-E (QGLC)
Line Card supports 4 portsThe 10 Gig Ethernet Line Card (XGLC) supports 1 portThe Switch Processor Input/Output
Card supports 2 ports.The DS3 Line Card supports 3 ports.
The Ethernet 10/100 Line Card supports 8 ports.The Ethernet 1000 Line Card supports 1 port.The Quad Gig-E (QGLC)
Line Card supports 4 portsThe 10 Gig Ethernet Line Card (XGLC) supports 1 portThe Switch Processor Input/Output
Card supports 2 ports.The DS3 Line Card supports 3 ports.
Oper
State
State
Displays the operational state of the card. The possible operational states are:
Active: Indicates that the card is an active component that will be used to process subscriber data sessions.Standby:
Indicates that the card is a redundant component. Redundant components will become active through manual
configuration or automatically should a failure occur.Offline: Indicates that the card is installed but is not ready to
process subscriber data sessions. This could be due to the fact that it is not completely installed (i.e. the card interlock
switch is not locked, refer to the System Installation Guide for information on installing cards in the system) or that its
processes have been halted.
Active: Indicates that the card is an active component that will be used to process subscriber data sessions.Standby:
Indicates that the card is a redundant component. Redundant components will become active through manual
configuration or automatically should a failure occur.Offline: Indicates that the card is installed but is not ready to
process subscriber data sessions. This could be due to the fact that it is not completely installed (i.e. the card interlock
switch is not locked, refer to the System Installation Guide for information on installing cards in the system) or that its
processes have been halted.
SPOF
Displays whether or not the component is a single point of failure (SPOF) in the system. If the component is an SPOF,
then a Yes will appear in this column. If not, a No will be displayed.
then a Yes will appear in this column. If not, a No will be displayed.
Attach
Displays the PACs/PSC/PSC2s and SPCs/SMCs that the line cards are being associated with.