Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Troubleshooting the System
Taking Corrective Action ▀
Cisco ASR 5000 Series System Administration Guide ▄
OL-22969-02
Check the entry in the Oper State column next to the line card that was just halted. Its state should be Offline.
If the card was in active mode prior to the execution of this command, the state of the redundant component
associated with it should now be Active.
If the card was in active mode prior to the execution of this command, the state of the redundant component
associated with it should now be Active.
Restoring a Previously Halted Card
Follow the instructions below to restore a card that was previously halted. These instructions assume you are at the root
prompt for the Exec mode:
prompt for the Exec mode:
Step 1
Reboot the card to be restored by entering the following command:
You will receive the following prompt:
Step 2
Press to start the reboot of the card.
Step 3
Verify that the migration was successful by entering the following command at the prompt:
Check the entry in the Oper State column next to the line card that was just restored. Its state should be the
state of that it was in before it was halted.
state of that it was in before it was halted.