Cisco Cisco Packet Data Gateway (PDG) Merkblatt

Seite von 4162
show sgs-service   
▀  show sgs-service vlr-status full 
 
 
▄  Cisco ASR 5x00 Statistics and Counters Reference 
3918 
   
show sgs-service vlr-status full 
 
Table 497. 
show sgs-service vlr-status
 Command Output Descriptions 
Field
 
Description
 
MMEMGR
 
The MME manager instance where the SGs service is running. 
MME Reset
 
A system-wide parameter which is set to "Yes" when the MME service ( and SGS service) is up or after the 
MME restarts after a failure. This is a restoration indicator at MME service. 
Service ID
 
The system generated identification number of the SGs service. 
Peer ID
 
The system generated identification number of the VLR’s SCTP connection. 
VLR Name
 
The VLR name as configured in the SGs service. 
SGS Service Name
 
The configured SGs service name. 
VLR Offload
 
Displays if the VLR is configured/marked for offload state.  
SGS Service 
Address
 
The IP address of the interface to which the SGs service is bound. 
SGS Service Port
 
The port number of the interface to which the SGs service is bound. 
VLR IP Address 
(es)
 
The VLR IP address as configured in the SGs service. If multi-homing is configured, both addresses will be 
shown. The path status for each is displayed as either UP or DOWN. 
VLR Port
 
The VLR port number as configured in the SGs service. 
Assoc State
 
The current state of the SCTP association, either UP or DOWN. 
Assoc State Up 
Count
 
The total number of times the SCTP association has come up. 
VLR Failure Detach
 
Indicates if the 
sgs vlr-failure
 Exec Mode command is enabled (Yes) or disabled (No). 
Detach Count: The total number of subscribers that have already been detached as a result of the sgs 
vlr-failure command. 
Total: Indicates the total number of subscribers that have to be detached. 
VLR Recover 
Detach
 
Indicates if the 
sgs vlr-recover
 Exec Mode command is enabled (Yes) or disabled (No). 
Detach Count: The total number of subscribers that have already been detached as a result of the sgs 
vlr-recover command. 
Total: Indicates the total number of subscribers that have to be detached. 
SGS-AP Statistics 
Tx
 
The total number of messages transmitted by this service for the associated message type.
 
ReTx
 
The total number of messages retransmitted by this service for the associated message type.
 
Rx
 
The total number of messages received by this service for the associated message type.